View HIR89-01C-1R_4465243.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lifecyclephase: revision : 1 expired period: forever release date:2010-12-16 13:53:02.0 everlight electronics co., ltd. http://www.everlight.com rev 1 page: 1 of 10 device no j dir-0000413 prepared date j 12-10-2010 prepared by j jaine tsai technical data sheet infrared midled led hir89-01c/1r features ? low forward voltage. ? view angle 30 (typ.) ? pb free ? the product itself will remain within rohs compliant version. ? compatible with infrared and vapor phase reflow solder process ? taping as top view. descriptions ? hir89-01c/1r is an infrared emitting diode with miniature midled package. the device is spectrally matched with silicon photodiode and phototransistor. applications ? infrared applied system device selection guide chip led part no. material lens color hir89-01c/1r gaalas water clear
lifecyclephase: revision : 1 expired period: forever release date:2010-12-16 13:53:02.0 everlight electronics co., ltd. http://www.everlight.com rev 1 page: 2 of 10 device no j dir-0000413 prepared date j 12-10-2010 prepared by j jaine tsai hir89-01c/1r package dimensions notes: 1.all dimensions are in millimeters 2.tolerances unless dimensions ? 0.1mm
lifecyclephase: revision : 1 expired period: forever release date:2010-12-16 13:53:02.0 everlight electronics co., ltd. http://www.everlight.com rev 1 page: 3 of 10 device no j dir-0000413 prepared date j 12-10-2010 prepared by j jaine tsai hir89-01c/1r absolute maximum ratings (ta=25
) parameter symbol rating units continuous forward current i f 65 ma peak forward current *1 i fp 200 ma reverse voltage v r 5 v operating temperature t opr -40~ +85
storage temperature t stg -40 ~ +100
soldering temperature *2 t sol 260
power dissipation at(or below) 25
free air temperature p d 100 mw notes: *1:i fp conditions--pulse width 500 ? s and duty 5%. *2:soldering time 5 seconds. electro-optical characteristics (ta=25
) parameter symbol condition min. typ. max. unit radiant intensity i e i f =70ma ,tp=20ms 25 -- 125 mw/sr peak wavelength ? p i f =100ma 840 850 870 nm spectral bandwidth ? i f =100ma -- 30 -- nm i f =20ma -- 1.40 1.70 forward voltage v f i f =70ma,tp=20ms -- 1.55 1.90 v reverse current i r v r =5v -- -- 10 ? a rise time tr i f =20ma -- 16 -- ns fall time tf i f =20ma -- 30 -- ns view angle 2 1/2 i f =20ma -- 30 -- deg rank condition j i f =70ma unit j mw/sr bin number b c d min 25 40 63 max 50 80 125
lifecyclephase: revision : 1 expired period: forever release date:2010-12-16 13:53:02.0 everlight electronics co., ltd. http://www.everlight.com rev 1 page: 4 of 10 device no j dir-0000413 prepared date j 12-10-2010 prepared by j jaine tsai 790 0 20 40 60 80 100 890 850 810 830 870 930 910 950 i f =20ma ta=25 c 75 -25 800 0 825 850 25 50 875 900 100 0 10 1 10 10 2 3 10 4 2 1 3 4 5 6 7 8 0 -40 -20 40 20 0 60 100 80 hir89-01c/1r typical electro-optical characteristics curves fig.1 forward current vs. fig.2 spectral distributio n ambient temperature fig.3 peak emission wavelength fig.4 forward current ambient temperature vs. forward voltage
lifecyclephase: revision : 1 expired period: forever release date:2010-12-16 13:53:02.0 everlight electronics co., ltd. http://www.everlight.com rev 1 page: 5 of 10 device no j dir-0000413 prepared date j 12-10-2010 prepared by j jaine tsai 0 i f -forward current (ma ) 10 10 0 10 1 10 2 3 10 4 i e - r a d i a n t i n t e n s i t y ( m w / s r ) 10 100 1000 -20 0.6 0.9 0.7 0.8 1.0 0.2 0.4 0 0.2 0.4 0.6 50 70 80 60 40 30 -10 0 20 10 hir89-01c/1r typical electro-optical characteristics curves fig.5 relative intensity vs. fig.6 relative radiant intensity vs. forward current angular displacement
lifecyclephase: revision : 1 expired period: forever release date:2010-12-16 13:53:02.0 everlight electronics co., ltd. http://www.everlight.com rev 1 page: 6 of 10 device no j dir-0000413 prepared date j 12-10-2010 prepared by j jaine tsai hir89-01c/1r precautions for use 1. over-current-proof customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before devices are ready to use. 2.2 shelf life in sealed bag from the bag seal date : 18 months at 10c~30c and < 90% rh. 2.3 after opening the package, the devices must be stored at 10c~30c and ? 60%rh, and used within 72 hours(floor life). 2.4 if the moisture absorbent material( desiccant material) has faded or unopened bag has exceeded the shelf life or devices(out of bag) have exceeded the floor life, baking treatment is required. 2.5 if baking is required, refer to ipc/jedec j-std-033 for bake procedure or recommend the following conditions : 192 hours at 40c +5/?0c and < 5 % rh (reeled/tubed/loose units) or 96 hours at 60c 5c and < 5 % rh (reeled/tubed/loose units) or 24 hours at 125c 5c, not suitable for reel or tubes.
lifecyclephase: revision : 1 expired period: forever release date:2010-12-16 13:53:02.0 everlight electronics co., ltd. http://www.everlight.com rev 1 page: 7 of 10 device no j dir-0000413 prepared date j 12-10-2010 prepared by j jaine tsai hir89-01c/1r 3. soldering condition 3.1 pb-free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board.
lifecyclephase: revision : 1 expired period: forever release date:2010-12-16 13:53:02.0 everlight electronics co., ltd. http://www.everlight.com rev 1 page: 8 of 10 device no j dir-0000413 prepared date j 12-10-2010 prepared by j jaine tsai hir89-01c/1r 4.soldering iron each terminal is to go to the tip of soldering iron temperature less than 350
for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double-head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing.
lifecyclephase: revision : 1 expired period: forever release date:2010-12-16 13:53:02.0 everlight electronics co., ltd. http://www.everlight.com rev 1 page: 9 of 10 device no j dir-0000413 prepared date j 12-10-2010 prepared by j jaine tsai 1 2 2 1 cathode anode 2 1 hir89-01c/1r package dimensions note: the tolerances unless mentioned is ? 0.1mm ,unit = mm 2. carrier tape dimensions:(quantity: 2000pcs/reel) note: the tolerances unless mentioned is ? 0.1mm ,unit = mm
lifecyclephase: revision : 1 expired period: forever release date:2010-12-16 13:53:02.0 everlight electronics co., ltd. http://www.everlight.com rev 1 page: 10 of 10 device no j dir-0000413 prepared date j 12-10-2010 prepared by j jaine tsai rohs pb cpn : p n qty : lot no : reference : cat : hue : ref : everlight made in taiwan packing procedure hir89-01c/1r aluminum moistue-proof bag label desiccant label label form specification cpn: customer?s production number p/n : production number qty: packing quantity cat: ranks hue: peak wavelength ref: reference lot no: lot number made in taiwan: production place notes 1. above specification may be changed without notice. everlight will reserve authority on material change for above specification. 2. when using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. everlight assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. these specification sheets include materials protected under copyright of everlight corporation. please don?t reproduce or cause anyone to reproduce them without everlight?s consent. everlight electronics co., ltd. tel: 886-2-2267-2000, 2267-9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886-2267-6244, 2267-6189, 2267-6306 tucheng, taipei 236, taiwan, r.o.c http://www.everlight.com

▲Up To Search▲

Price & Availability of HIR89-01C-1R

	To Download HIR89-01C-1R Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .